Nearly every second user has a problem of getting no signal and bad signal in the smartphone. Because of this kind of problem, we have to face the problem of call drop, internet speed slide, poor voice quality etc. The way smartphones have become an important factor in the lives of users, users are quite upset due to poor network. To get rid of this problem, we are providing 5 tips or tricks here, which can increase the signal strength of your phone.
Table of Contents
Turn on the cover or case on the phone Removal :
If you use any case or cover on your smartphone, you may have to face the problems related to the signal. This kind of problem is especially high when users use a thick or rugged case on the phone. Also, you must also pay attention that you will not break the phone’s antenna bands in such a way that the phone’s antenna bands are not blocked.
Removes interrupts between smartphone and cell towers:
Now you might be thinking how to get rid of the barriers between smartphones and cell towers. Let us tell that this is possible. Your phone receives frequent signals from cell towers. And they pass through many different obstructions. Because of this, until the signals reach the phone, its strength becomes weak. Whenever such a problem comes to the user, they should take the phone to a window or open area. If you are in a place where the wall is made of metal or concrete then you have to come out of there for a better signal. Also, you have to keep your phone away from electronic equipment and metal objects.
Save cellphone battery:
Smartphones have been built in such a way that whenever the battery gets low the battery saver option is turned on automatically. So whenever the phone’s battery is low, it is very difficult to search the phone’s signal. In this case, turn off the apps you are not using. Also, turn off other connectivity options, including Bluetooth and WiFi. This will cost the less battery.
Check SIM card:
Sometimes the signal in the phone is completely over. It also happens due to the accumulation of SIM or the accumulation of dust on the SIM. The signal strength of any phone also depends on the SIM card of the phone. In such a case, keep the SIM clean from time to time to get rid of this problem. If SIM is damaged then you can replace the SIM by going to the service center.
Switch ON 2G/3G Network:
In many areas the 4G network is quite low. But our cell phones have been built in such a way that if any network mode has a signal wipe, it can switch itself to the other mode. However, the device also pushes Priority Network mode, which causes a call drop problem. The methods given below can be used to fix this.
For Android users: Go to connection settings. Then tap Network Mode and tap choose Network. Now select 2G or 3G option.
For iPhone users: Go to settings. Then tap Cellular and click Cellular data options. Now disable Enable 4G.